Micro LEDforum 2018

 

 

會議簡介

在Micro LED應用即將開始普及的狀況下，LEDinside預估至2025年應用在大尺寸顯示器的Micro LED產值將會達到19.8億美元占全體應用的68%。而今年LEDinside也針對六大主要製程瓶頸，邀請國內外專家做精闢解析：在磊晶與晶片製程，將分別以晶片及設備角度探討Micro LED的晶片及相關製程解決方案，在巨量轉移方面，將由eLux、Uniqarta、QMAT、KIMM及等業界代表講述各種巨量轉移之技術方法，在全彩化方面，將由Nitride Semiconductors發表由UV-LED微型晶片激發的全彩化圖案的技術及Topcon的Micro LED亮度和色彩檢測方法，在驅動方面，則由Macroblock發表最新的Micro LED驅動IC的解決方案。

LEDinside 是全球第一個舉辦 Micro LED 技術研討會的單位，每年舉辦的 Micro LEDforum 已經吸引全球廠商與投資者雲集，想了解 Micro LED製程瓶頸與技術突破，您千萬不能錯過這年度盛會!

關於Micro LEDforum 2018

日期

2018年7月12日(四)

時間

10:00 ~ 17:00
(09:00 am開始報到)

地點

台大醫院國際會議中心201會議室
台北市徐州路2號

語言

中文 / 英文
(現場提供同步翻譯)

議程資訊

10:00-10:30

LEDinside: 2018 Micro LED次世代顯示技術產業趨勢

Roger Chu
Research Director of LEDinside / TrendForce

LEDinside預估至2025年Micro LED市場產值將會達到28.91億美元。目前Micro LED 所面臨的技術瓶頸，共區分六個面向，包括磊晶與晶片、轉移、全彩化、電源驅動、背板及檢測與修復技術。 由於Micro LED的性能優良，可應用在穿戴式的手錶、手機、車用顯示器、擴增實境/虛擬實境、顯示屏及電視…等領域，但因為技術困難及加工成本較高，因此更適合應用在高階的電視、顯示屏及車用顯示器。 Micro LED卡在重重製程瓶頸尚待突破，短期內難有商品化產品出現，廠商轉攻以現有設備並改變部分製程參數條件就可以研發出的Mini LED等級產品。TrendForce LED研究（LEDinside）指出，Mini LED未來可能的發展方向，涵蓋電視、手機、車用面板、顯示屏等，預估2023年整體Mini LED產值將達到10億美元，其中LED顯示屏及大尺寸電視等，將是Mini LED未來應用的主流。 LEDinside 將於Micro LEDforum 全面解析2018 Micro LED 技術挑戰與 Mini / Micro LED市場機會。
10:30-11:00

由 UV-LED 微型晶片激發的全彩化圖案

Yoshihiko Muramoto
President & CEO / Nitride Semiconductors

Koichi Kajiyama
Executive Director / V-technology

The micro-LED display is one of candidate of next generation display panel, but it is a tough challenge. We propose a solution which is excited by near Ultraviolet LED. The RGB full color element which is exited by near UV-LED can gain excellent color combination because there are many RGB phosphors suitable for near UV region. Furthermore its control circuit is easier compared with the integrated monolithic RGB LED method. In order to make a real flexible micro LED display, we need to develop 4 processes such as micro LED chip, color conversion technology, Laser Lift off and reconstitution from sapphire to back plane, mainly. The micro LED chip will be introduced by Mr.Muramoto of Nitride Semiconductor Co.,Ltd in this session. Due to the low emission efficiency of R, G micro LED Chips, a patterning technology of fluorescence resists have been developed. V-technology have developed R, G, B resists which consist of inorganic fluorescence materials to keep long life time. These materials in the small cells are arrayed on the PI Film. The minimum size of the cell is 10×30 μm. An apparatus of LLO has been developed and is used to determine the optimum condition of LLO for micro LED chips. As for the reconstitution process, we are developing a new technology without using adhesive tape transfer.
11:00-11:30

最新 Micro LED 亮度和色度 Mura分析

Kazuto Nishikawa
Manager / Topcon

To satisfy demand for color gamut and contrast expanding, μLED will become mainstream. But luminance and chromaticity uniformity and Mura are inevitable phenomenon. Our world first absolute 2D spectroradiometer SR-5000 is the perfect tool for Mura analysis and material development for μLED. Also SR-5000M is designed especially for sub-pixel inspection. This model with microscope enables to fulfill even 2μm level sub-pixel Mura analysis as micro spectroscopy. Speaking the tool detail with application on presentation.
11:30-12:00

Micro LED 表面缺陷檢測方案

Edwin Chew
Regional Product Manager(Asia Region) / KLA- Tencor

KLA-Tencor will showcase it’s inspection solution for the MicroLED industry. This talk will deal with the wide range of defects expected to be seen as well as the 8720’s ability to detect micro level defects. This is critical because you cannot control what you cannot see.
12:00-13:00

午休

13:00-13:30

使用流體組裝轉移方法實際製造發光顯示器

Paul Schuele
Founder and CTO / eLux, Inc.

Mass transfer of µLED is the key technology to enable µLED displays. Unlike conventional pick-and-place or direct bonding transfer, eLux focuses on the massively parallel assembly processes that enable low cost manufacturing of displays at arbitrary pixel pitch. Technical details of the fluidic assembly process will be presented.
13:30-14:00

LEAP 雷射先進放置

Ronn Kliger
CEO and Co-Founder / Uniqarta, Inc.

This presentation will introduce a novel method of placing microLEDs at rates exceeding 100 million units/hour. The solution is selective in that undesired microLEDs can be avoided and only desired ones placed. The presentation will describe the laser transfer mechanism and include examples of ultra-high speed miniLED and microLED transfer.
14:00-14:30

巨量轉移技術分析-LED材料與檢測方式以實現 Micro LED 高良率巨量生產

Francois J. Henley
President and CEO / QMAT, Inc.

Realizing the great promise of microLED displays requires cost-effective microLED mass-production. Four key areas spanning materials, process and production equipment are reviewed to understand their interactions and role in achieving high-yield MicroLED mass-production. The mass-transfer assembly step is of particular importance as the point where other key steps converge to form the emissive display array. Proposed mass-transfer technologies and approaches will be introduced and compared for their compatibility with requirements to achieve high-speed, cost-effective microLED mass-production. Unique microLED test challenges at the wafer level, compatible mass-transfer equipment capabilities will be discussed. The key elements of the four steps driving MicroLED assembly yield, uniformity, scalability and production throughput will also be presented.
14:30-15:00

滾輪對板轉移技術應用於發光顯示器

Jae-Hyun Kim, Ph.D.
Head of Nano-Mechanics Department / KIMM(Korea Institute of Machinery & Materials)

In this talk, manufacturing process of flexible inorganics electronics is overviewed, and the transfer process is highlighted as a key enabling technology. The basic mechanics of transfer is described, and a roll-to-plate transfer technology is introduced for high productivity. Some demonstrations realized by the roll-to-plate transfer are presented including flexible thin film transistor (TFT), flexible silicon memory, mini-LED signage, and stretchable micro-LED display.
15:00-15:20

茶歇 (Break)

15:20-15:50

從 HDR10 標準看 Micro LED 顯示屏應用

Kerry Huang
Manager of micro-LED Dept. / Macroblock

HDR10標準讓影像觀賞層次再提升一個層級，號稱終極顯示技術的micro-LED橫空出世。兩者相加能夠帶來何種新的觀賞體驗，何時micro-LED的顯示器可以面市?聚積科技分享目前micro-LED在顯示設備的進度，而LED驅動IC能如何幫助LED顯示屏符合HDR10的標準。
15:50-16:20

像素陣列的定向自組裝

Dr. Clinton Ballinger
CEO / SelfArray

－Lean business development and how it relates to rapid commercialization of new technologies－Background and inspiration for diamagnetic directed self- assembly (DSA) to align electronic components in a massively parallel fashion－Benefits of DSA as it relates to direct view LED display manufacturing, including a discussion of limitations, features and benefits－The current issues facing the industry with respect to manufacturing methodologies using micro and quasi-micro LEDs－SelfArray research efforts and near-term milestones, industry-specific goals to guide the development－Performance goals for throughput, yield, LED size and pitch－Market and where DSA fits in the value chain－Future plans
16:20-16:50

微型發光二極體技術於非顯示應用的商機

Joel Yue
Evangelist for micro LED / Jasper Display Corp.

1. 非顯示器用途的光源市場是哪些領域?2. 非顯示器市場特性對特殊光源有何技術要求?3. 微型發光二極體技術有哪些特性?4. 如何發揮微型發光二極體基的特殊光源技術特性?5. 怎樣的產業化策略規劃較可發揚微型發光二極體技術在非顯示器市場之潛力?

本議程隨時會有變動，主辦單位有更動講師及議題的權利，將不另行通知
請留意TrendForce公佈在網路上關於本次議程的最新資訊

主講人簡介

儲于超

綠能事業處協理 / 集邦科技

LEDinside: 2018 Micro LED次世代顯示技術產業趨勢

儲于超研究協理在LED產業有多年的研究資歷，包括LED零組件，照明，背光的整體供應鏈。此外，他同時負責電池產業觀察。儲于超先生過去曾在華南金控擔任分析師，針對DRAM，封裝以及電子產業都有所擅長。

Yoshihiko Muramoto

President & CEO / Nitride Semiconductors

由 UV-LED 微型晶片激發的全彩化圖案

Mr. Muramoto has distributed UV-LED papers as following:
－48th Society for Information Display(SID) International Symposium, Seminar & Exhibition invited paper “Application of UV-LED to LCD Backlights”
－Semiconductor, Science & Technology Vol.29 Number8 August2014
－Invited paper ”Development and Future of Ultraviolet Light-Emitting Diodes ~UV-LED will replace UV Lamp~ which was selected as highlights of SST 2014

Koichi Kajiyama

Executive Director / V-Technology

由 UV-LED 微型晶片激發的全彩化圖案

－1974 Graduated from the Faculty of Science Department of Physics of Hokkaido University.
－－Joined Komatsu Co., LTD Research Center.
－－Development of Ecimer Laser for Semiconductor Exposure System.
－－Development of Nonliner Spectroscopy.
－1987 Established Admon Science Company.Development of Excimer Laser.
－－Development Automated Optical Inspection System for LCD and Optical Disk.
－2000 Director of V-Technology.

Kazuto Nishikawa

Sales Manager / Topcon

最新Micro LED亮度和色度 Mura分析

Mr. Nishikawa started to work in Topcon from 1981 in international sales dept.
Then in 1994 moved to work in Hong Kong as senior sales manager covering China and Hong Kong market to promote Topcon optical instrument.
After 7 years in Hong Kong and Shanghai, he moved back to Topcon in Tokyo to promote semiconductor inspection instrument, aligner for FPD and optical measuring instrument as sales manager.

Edwin Chew

Regional Product Manager(Asia Region) / KLA- Tencor

Micro LED 表面缺陷檢測方案

He has been in KLA-Tencor for 11 years dealing with Field Applications support for HDD and Compound Semi related Wafer customers in the candela group. During the 10 years, he been involved with the several candela inspection tool transitions to the 5th Generation today. Prior to that he was in the manufacturing sector for 5 years and hence am able to look at situations from both sides of the coin to drive suitable solutions for our customers. The Micro LED space is very exciting in many aspects today and we hope to grow our knowledge and be a part of this industry’s growth.

Paul Schuele

CTO / eLux, Inc.

使用流體組裝轉移方法實際製造發光顯示器

Dr. Schuele has been the technical lead for µLED display development at Sharp Labs of America until 2016. In October 2016 he cofounded eLux to commercialize µLED technology and he is currently CTO and process integration lead at eLux. The current work is a collaboration with LED manufacturers, materials suppliers and display backplane manufacturers to make large area direct emitting displays.
He received a Ph.D. in Solid State Physics from Montana State University and has been a materials scientist and process integration engineer at Inmos, Ramtron, Micron and tsmc. He holds 64 US patents primarily in the fields of sensors, semiconductor processing and flat panel displays.

Ronn Kliger

Co-founder and CEO / Uniqarta

LEAP 雷射先進放置

Ronn is co-founder and CEO of Uniqarta. Throughout his career Ronn has focused on developing and commercializing new technologies. Previous to Uniqarta, he was at Analog Devices were he founded and led several successful new business units. Ronn has a BEE from Georgia Tech, an MSEE from the University of Southern California, and an MBA from Northeastern University.

Francois J. Henley

President and CEO / QMAT

巨量轉移技術分析-LED材料與檢測方式以實現 Micro LED 高良率巨量生產

Francois J. Henley is President and CEO of QMAT, Inc., a developer of engineered substrate process technology for the optoelectronics and power electronics markets. Mr. Henley is also President and CEO of Tesoro Scientific, Inc., a developer of microLED test and mass-transfer equipment.
Prior to QMAT, Mr. Henley was the founder and President of Silicon Genesis Inc. (SiGen, an electronic substrate technology company). Mr. Henley was also the founder and President of Photon Dynamics, a leader in LCD flat-panel production test equipment using the Voltage Imaging method for TFT array test he invented.
Mr. Henley holds a BSEE from RPI and an MSEE from the University of California, Berkeley, where he also completed PhD course requirements in quantum electronics and semiconductor materials science.
Mr. Henley has authored over 30 papers and articles and is named in over 140 patents in the areas of metrology, SOI and opto-electronic processing.

Jae-Hyun Kim

Head of Applied Nano-Mechanics Department / Korea Institute of machinery and Materials (KIMM)

滾輪對板轉移技術應用於發光顯示器

“Jae-Hyun Kim”, Ph.D. has been a researcher at Korea Institute of machinery and Materials (KIMM) in the field of nano-mechanics and nano-mechanical systems since 2003. He has studied thin film mechanics of semiconductor and display materials, and has developed transfer machines for flexible semiconductor and display applications. ”Kim” received Ph.D., M.S., and B.S. degrees in mechanical engineering from Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea.

黃炳凱

微發光二極體事業部經理 / 聚積科技

從HDR10標準至micro-LED顯示屏

現任職於聚積科技，擔任微發光二極體事業部經理一職，帶領市場與銷售團隊，規劃產品與擬定市場策略。黃炳凱在IC設計領域有12年經驗，LED顯示屏則有9年經驗。領有國立台灣大學企管碩士與國立清華大學動力機械碩士，並擁有9項美國，中國與台灣專利，著有LED顯示技術相關文章數篇，並曾受中國顯示屏協會邀請發表論文。

Dr. Clinton Ballinger

CEO / SelfArray

像素陣列的定向自組裝

Dr. Clinton Ballinger is one of the world’s leading authorities in nanotechnology and products enabled by novel semiconductor materials. He is a serial entrepreneur with a reputation for launching “world’s first” products across multiple markets, on time and under budget. Previous products include quantum dot LEDs now used by Samsung in QLED displays, cancer research bio-reagents, military night vision products and thermoelectric devices. He possesses a diverse background with demonstrated lean business acumen that includes founding and operating companies, creating, developing and launching new products, extensive capital raising experience, and global team development.

游正鋒

Evangelist for Micro LED & LCOS-Spatial Light Modulator and North America Region EDK Sales / Jasper Display Corp.

微型發光二極體技術於非顯示應用的商機

Dr. C.F.J. Yue received his Ph. D. (1998) at University of Florida. He served as senior engineer in Marvell Semiconductor, Inc. (2000, U.S.A.), assistant professor in Far East University (2010, white LED phosphor glass encapsulation, diffractive optical element design, solar thermal power generation system project), researchers in Institute of Optoelectronic Engineering (2013, graphene CVD and transparent electrode materials, interface engineering) then Medical School & Dentistry Professional College (2015, 3D printing of biomedical materials) of Taiwan University, and Taipei University of Technology (2017, Laser Melting Deposition additive manufacturing). He currently works as Evangelist for micro LED & LCOS-Spatial Light Modulator at Jasper Display Corporation (Taiwan office).

贊助廠商

贊助方案

LEDinside為全面性的LED產業趨勢及情報分享平台，而Micro LEDforum則是LEDinside針對Micro LED議題的年度成果分享。台灣是全球LED產業關鍵推手，透過贊助本研討會，您將獲得獨特的宣傳推廣機會，在眾多廠商面前展示企業形象、享受絕佳曝光、能主動接觸業界上中下游的重要決策者，做垂直整合行銷, 藉此拓展您的貿易版圖並增進品牌商譽。此外，透過此次贊助，您還可將獲得的研討會門票提供給您的客戶，建立彼此更良好的關係。

金級方案

銀級方案

線上註冊

立即購票

活動費用：早鳥優惠7,000元

7/1後及現場報名為原價8,000元，線上報名開放至7/10(二)中午12:00止，敬請提早註冊!

本次活動含同步翻譯

注意事項

1. 收到款項後恕不退費，惟本人不克參加可將資格轉讓他人。若當日無法報到者請告知主辦單位提供講義電子檔。
2. 主辦單位確認收到款項後將寄確認碼至註冊信箱，研討會當天請攜帶確認碼與一張名片辦理報到。
3. 款項確認後，發票將於研討會前統一以掛號寄出，如需另外開二聯式個人發票，請於備註中註明。

早鳥優惠

NTD $7,000

即日起至2018/6/30

標準價格

NTD $8,000

7/1後&現場購票

交通資訊

台大醫院國際會議中心
100台北市中正區徐州路2號2樓(201室)

捷運路線
淡水北投線(紅線)：台大醫院站2號出口
板南線(藍線)：善導寺站2號出口

連絡我們

如果您需要進一步的協助，請與我們連絡

票務

Jade Chou
led_service@trendforce.com
+886-2-8978-6488 ext. 661

贊助

Wendy Lin
wendylin@trendforce.com
+886-2-8978-6488 ext. 821

媒體

Pinchun Chou
pinchunchou@trendforce.com
+886-2-8978-6488 ext. 669

Lindsay Hou
lindsayhou@trendforce.com
+886-2-8978-6488 ext. 667

主辦單位

協辦單位

© 2018 LEDinside, a division of TrendForce Corp. All rights reserved.

MicroLEDforum2019 熱烈報名中！ 立即購票